Bukana ea Mosebelisi ea Mohloli o le Mong oa Khase
Bakeng sa mabaka a ts'ireletso, sesebelisoa ke feela ka ts'ebetso le tlhokomelo ea basebetsi ba tšoanelehang.Pele o sebetsa kapa o lokisa, ka kopo bala le ho laola ka botlalo litharollo tsohle tsa litaelo tsena.Ho kenyelletsa ts'ebetso, tlhokomelo ea lisebelisoa le mekhoa ea ts'ebetso.Le mehato ea bohlokoa haholo ea tšireletso.
Bala Litlhokomeliso tse latelang pele u sebelisa mochine.
Lethathamo la 1 Litemoso
| Litemoso |
| 1. Tlhokomeliso: Ho fetisoa ho sa lumelloeng ha likarolo tse ncha e le ho qoba tšusumetso ea sesebelisoa Tšebeliso e tloaelehileng. 2. Tlhokomeliso: U se ke ua qhaqha, ua chesa kapa ua chesa libeteri.Ho seng joalo betri e ka phatloha, kotsi ea mollo kapa ea ho chesoa ke lik'hemik'hale. 3. Tlhokomeliso: Se ke oa lekanya sesebelisoa libakeng tse kotsi kapa ua beha liparamente. 4. Tlhokomeliso: lisebelisoa tsohle tsa fektheri tse lekantsoeng pele.Basebelisi ba sebelisa litekanyo tse khothaletsoang hang bonyane likhoeli tse ts'eletseng ho boloka quasi-instrument Accuracy. 5. TEMOSO: Etsa bonnete ba hore u qoba ho sebelisa sesebelisoa sebakeng se senyang. 6. Temoso: Se ke oa sebelisa lihlapolli, sesepa, lisebelisoa tsa ho hloekisa kapa ho bentša ka ntle ho Shell. |
1. Likarolo tsa sehlahisoa le litekanyo
Ponahalo ea sehlahisoa e bontšitsoe setšoantšong sa 1:
Setšoantšo sa 1
Tlhaloso ea ponahalo joalo ka ha e bonts'itsoe ho Lethathamo la 2
Lethathamo la 2
| Ntho | Tlhaloso |
| 1 | Sensor |
| 2 | Buzzer (alamo e utloahalang) |
| 3 | Li-pushbuttons |
| 4 | Mask |
| 5 | Pontšo ea kristale ea metsi (LCD) |
| 6 | Lialamo tse bonoang (li-LED) |
| 7 | Sekotwana sa alligator |
| 8 | Letlapa la mabitso |
| 9 | ID ea Sehlahisoa |
2. Tlhaloso ea Pontšo
Setšoantšo sa 2 Lintlha tsa Pontšo
Lethathamo la 3 la Pontšo ea Lintlha
| Ntho | Tlhaloso |
| 1 | Boleng ba linomoro |
| 2 | Betri (Bontša le ho benya ha betri e le tlase) |
| 3 | Likarolo ho milione (ppm) |
3. Mekhoa ea tsamaiso
Litekanyo: Bolelele * bophara * botenya: 112mm *55mm* 46mm Boima: 100g
Mofuta oa Sensor: Electrochemical
Nako ea ho arabela: ≤40s
Alamo: Alamo e utloahalang≥90dB(10cm)
Alamo ea khanya ea LED e khubelu
Mofuta oa Battery: CR2 CR15H270 lithium libeteri
Sebaka sa Mocheso: ℃20℃ ～50℃
Mongobo:0～95％ (RH) Ha e koleketla
Mefuta e tloaelehileng ea khase:
Letlapa la 4 Mekhahlelo e tloaelehileng ea khase
| Khase e lekantsoeng | Lebitso la Khase | Litlhaloso tsa Tekheniki | ||
| Lekhalo la ho lekanya | Qeto | Alamo | ||
| CO | Carbon monoxide | 0-1000ppm | 1ppm | 50ppm |
| H2S | Hydrogen sulfide | 0-100ppm | 1ppm | 10ppm |
| NH3 | Ammonia | 0-200ppm | 1ppm | 35ppm |
| PH3 | Phosphine | 0-1000ppm | 1ppm | 10ppm |
4. Tlhaloso ea Bohlokoa
Mesebetsi ea bohlokoa joalo ka ha e bonts'itsoe ho Lethathamo la 5
Lethathamo la 5 Tlhaloso ea Bohlokoa
| Ntho | Mosebetsi |
 | Boemo ba standby, konopo ea menu |
| Tobetsa nako e telele bakeng sa konopo ea ho bulela le ho tima | |
| Hlokomela: | |
| 1. Ho qala alamo ea ho lemoha khase, tobetsa 'me u tšoare konopo metsotsoana e 5.Ka mor'a alamo ea ho lemoha khase ka ho itlhahloba, joale qala ts'ebetso e tloaelehileng. | |
| 2. Ho tima alamo e lemohang khase, tobetsa 'me u tšoare konopo metsotsoana e 5. | |
 | Ts'ebetso ea menu e butsoitse, konopo ea backlight switch |
 | Likonopo tsa Shift bakeng sa ts'ebetso ea menu |
 | Opereishene ea menu e sebetsa hantle, hlakola konopo ea alamo |
5. Litaelo tsa ts'ebetso ea lisebelisoa
● Bula
Boitlhahlobo ba lisebelisoa, bo lateloa ke pontšo ea mofuta oa khase (joaloka CO), mofuta oa sistimi (V1.0), letsatsi la software (mohlala, 1404 ho isa ho Mmesa 2014), boleng ba alamo ea boemo ba A1 (joalo ka 50ppm) pontshong, A2 tse peli. boleng ba alamo ea boemo (mohlala 150ppm), SPAN range (mohlala 1000ppm) hamorao, ho ea boemong ba ho sebetsa 60s (khase e fapane, nako ea ho bala e fapane le taba ea sebele) e felile, kenya nako ea sebele ea ho lemoha boemo ba gaseous.
● Alamo
Ha tikoloho e phahame ho feta litlhophiso tsa alamo ea boemo ba khatello ea khase e lekantsoeng, sesebelisoa se tla lla, khanya le alamo ea vibrate e etsahala.Ka tsela e iketsang, bulela lebone la morao.
Haeba mahloriso a tsoela pele ho phahamisa fihla lialamo tse peli, molumo le maqhubu a khanya a fapane.
Ha tekanyo ea khase e lekantsoeng e fokotsehile ho ea boleng bo ka tlase ho boemo ba alamo, alamo ea molumo, leseli le vibrate e tla felisa.
● Motho ea khutsisang
Maemong a alamo ea sesebelisoa, joalo ka ho khutsisa, tobetsa konopo,Molumo o hlakileng, tlhokomeliso e thothomelang.Silencer feela felisa boemo ba hona joale, ha hang hape.
Hona joale maikutlo a fetang molumo, khanya le vibrate li tla tsoela pele ho susumetsa.
6. Litaelo tse akaretsang tsa ts'ebetso
6.1 Menu e na le likarolo tse latelang:
a.Boemong ba standby, tobetsa hakgutshwane
senotlolo sa ho kenya menu ea ts'ebetso, LCD display idLE.Ho tsoa ho menu ea ts'ebetso ha LCD e bonts'a idLE, thesenotlolo sa ho tsoa ts'ebetsong ea menu.
b.Tobetsalinotlolo ho khetha mosebetsi o lakatsehang, lits'ebetso tsa menyu li hlalositsoe ho
Lethathamo la 6 ka tlase:
Lethathamo la 6
| Pontšo | Tlhaloso |
| ALA1 | Ho beha alamo e tlase |
| ALA2 | Ho beha alamo e phahameng |
| ZErO | E hloekisitsoe (e sebetsa moeeng o hloekileng) |
| -rFS. | Khutlisa password ea kamehla ea feme 2222 |
c.Kamora ho khetha ts'ebetso, senotlolo sa ho tseba le ho kenya ts'ebetso ea senotlolo sa ts'ebetso e nepahetseng.
6.2 Ts'ebetso ea menu
Tobetsakonopo ea ho kenya mesebetsi ea menu e ka sebetsa ka hokonopo ho khetha tšebetso ea menu e lakatsehang, ebe u li seta.Lintlha tse khethehileng li hlalositsoe ka tlase:
a.ALA1 Ho beha alamo e tlase:
Tabeng ea LCD ALA1, tobetsa konopo easenotlolo sa ho kenya tshebetsong.Ebe LCD e tla bonts'a boleng ba sete ea alamo ea boemo ba hajoale, 'me palo ea ho qetela e benya, tobetsaho etsa hore boleng ba palo e panyang e fetohe pakeng tsa 0 le 9, ebe o tobetsaho fetola boemo ba didijiti e panyang.Ka ho fetola boleng ba dijiti e benyang le boemo ba ho fifala, ho tlatsa boleng ba alamo e behiloeng, ebe o tobetsa konoposenotlolo sa ho hlahisa sete e felletseng kamora hantle.
b.ALA2 Ho beha alamo e phahameng:
Tabeng ea LCD ALA2, Tobetsa ho kenya ts'ebetso.Ebe LCD e tla bonts'a litlhophiso tse peli tsa alamo tsa hajoale, 'me ea ho qetela e le Flashing, ka ho tobetsale linotlolo ho fetola boleng ba ho panya le boemo ba linomoro tse benyang ho tlatsa boleng ba alamo e behiloeng, ebe o tobetsa konoposenotlolo sa ho hlahisa sete e felletseng kamora hantle.
c.ZErO E hlakotsoe (e sebetsa moeeng o hloekileng):
Ka mor'a nako ea ho sebelisa sesebelisoa, ho tla ba le zero drift, ha ho se na tikoloho e kotsi ea khase, pontšo ha e na zero.Ho fihlella tshebetso ena, tobetsa konoposenotlolo sa ho qeta ho hlakisa.
d.-rFS.Khutlisa litlhophiso tsa feme:
Sistimi parameter calibration phoso kapa ts'ebetso, e bakang hore alamo ea ho lemoha khase ha e sebetse, kenya tšebetsong.
Tobetsa 'me ka ho fetola boleng ba ho kenya hanyenyane le ho panya ha linomoro ka 2222, tobetsa konopo, haeba LCD e bonts'a litaelo tse ntle tsa ho hlaphoheloa e atleha, haeba LCD e bonts'a Err0, e hlalosa phasewete.
Tlhokomeliso: Ho khutlisetsa boleng ba ho lekanya fektheri ho bolela boleng ba ho khutlisetsa litlhophiso tsa feme.Ka mor'a hore ho hlahisoe li-parameters, ho hlokahala hore u ntlafatse hape.
7. Litaelo tse Khethehileng
Tšobotsi ena, haeba e sebelisoa ka mokhoa o sa lokelang, e ama ts'ebeliso e tloaelehileng ea sesebelisoa.
Boemong ba ho lemoha mahloriso a nako ea sebele, ha u ntse u Tobetsasenotlolo, LCD e tla bonts'a 1100, e lokolle konopo ho fetola boleng ba karolo ea ho kenya le ho panya ha 1111 sebakeng sa marang-rang.le, tobetsa konopo, LCD idLE, litaelo ho kenalenane la lenaneo.
Tobetsa easenotlolo kapakonopo ho switjha ho menu ka nngwe, tobetsa konoposenotlolo sa ho kenya tshebetsong.
a.Lintlha tsa mofuta oa 1-UE
LCD e tla bonts'a litsamaiso tsa tlhaiso-leseling tsa mofuta, 1405 (letsatsi la software)
Tobetsaor senotlolo sa ho hlahisa V1.0 (mofuta oa lisebelisoa).
Tobetsa easenotlolo sa ho tsoa ts'ebetsong ena, LCD idLE, e ka etsoa tlas'a tlhophiso ea menyetla.
b.2-FU tekanyo
LCD maemo a khatello ea khase ea kamehla ea calibration, 'me ea ho qetela e benya, ka ho tobetsa konopo ealeho fetola boleng ba "input calibration" ea khase ea mahloriso, e benya hanyane le palo e panyang, ebe o tobetsa konopokey, skrine e bonts'a '-' ho tloha ho tloha ho le letšehali ho ea ho le letona, ka mor'a pontšo e ntle, e feletseng ea litlhophiso tsa idLE.
Tlhaloso e qaqileng ea senotlolo sa Calibration [Khaolo ea VIII ea alamo ea ho lemoha khase ea calibration].
c.3-Ad AD boleng
Hlahisa boleng ba AD.
d.4-2H Pontšo ea ho qala
Beha khatello e tlase e qalile ho bonts'a, mme ka tlase ho boleng bona, e bonts'a 0.
Ho seta boleng bo batloang ka ho tobetsa konopo ealeho fetola palo e panyang le boleng ba panya, ebe o tobetsa konoposenotlolo sa ho bonts'a sete e felletseng kamora idLE.
e.5-rE Factory Recovery
Ha ho na karabelo, a ke ke a khona ho lemoha ka nepo likhase tsa khase ho hlaha litlhophiso tsa moea, kenya tšebetsong.
Joale LCD e tla bontša 0000, 'me ea ho qetela e benya, ka ho tobetsa konopo ealeho fetola boleng ba palo e benyang le palo e panyang ho kenya liparamente tsa ho khutlisa phasewete (2222), ebe o tobetsa konoposenotlolo sa ho bonts'a tse ntle le tse se nang thuso ka mor'a hore ho be le litekanyetso tse feletseng tsa ho hlaphoheloa.
Tlhokomeliso: Ho khutlisetsa boleng ba feme ea Calibration ho bolela boleng ba ho khutlisetsa litlhophiso tsa feme.Ka mor'a hore ho hlahisoe li-parameters, ho hlokahala hore u ntlafatse hape.
Sets'oants'o sa 3, Lethathamo la 8 bakeng sa alamo ea ho lemoha khase e bonts'itsoeng.
Setšoantšo sa 3 Setšoantšo sa khokahano
| Lethathamo la 8 Tlhaloso ea Karolo | |
| Ntho | Tlhaloso |
| ① | Mohloli oa Khase |
| ② | Calibration cap |
| ③ | Hose |
| ④ | Regulator le silinda ea khase |
Fetela ka khase ea calibration, boleng bo tsitsitseng bo tla bontšoa, joalokaha ho bontšitsoe Lethathamong la 9 le ne le sebetsa.
Lethathamo la 9 Mokhoa oa ho lekanya
| Tsamaiso | Skrine |
| Tšoara fatšekonopo ebe o tobetsa konopokonopo, lokolla | 1100 |
| Kenya switjha ea 1111 le hanyane e benyangka le | 1111 |
| Tobetsa eakonopo | idLE |
| Penya habeli hokonopo | 2-FU |
| Tobetsa eakonopo, E tla bonts'a boleng ba khatello ea khase ea kamehla | 0500 (boleng ba khatello ea khase ea calibration) |
| Boleng ba 'nete ba ho kenya letsoho ho fetola khatello ea khase e benyang le ho panya hanyane ka hanyane konopolelinotlolo. | 0600 (mohl) |
| Tobetsa eakonopo, Screen '-' tsamaea ho tloha ho le letšehali ho ea ho le letona.Kamora ho bonts'a hantle, ebe o bonts'a idLE. | idLE |
| Tobetsa nako e telelekonopo, khutlela ho sebopeho sa ho lemoha mahloriso, joalo ka ho lekanya ho atlehile, ho tla bonts'a mahloriso a boleng ba calibration, haeba phapang lipakeng tsa boleng ba khase e tloaelehileng e le kholo, ts'ebetso e kaholimo hape. | 600 (mohl) |
Ho boloka detector e le maemong a matle a ho sebetsa, etsa litokiso tse latelang kamoo ho hlokahalang:
• Lekanya, teko ea ho qhoma, 'me u hlahlobe sebui ka linako tse itseng.
• Boloka tlaleho ea ts'ebetso ea litokiso tsohle, litekanyo, liteko tsa maqhubu, le liketsahalo tsa alamo.
• Hloekisa bokantle ka lesela le mongobo le bonolo.U se ke ua sebelisa metsoako e hlapollang, sesepa kapa lipolishe.
• Se ke oa qoelisa sebui ka har'a maro.
Lethathamo la 10 Ho Fetola Battery
| Ntho | Tlhaloso | Setšoantšo sa likarolo tsa detector |
| ① | Likurufu tsa mochini oa khetla ka morao |  |
| ② | Khetla e ka morao | |
| ③ | Betri | |
| ④ | PCB | |
| ⑤ | Sensor | |
| ⑥ | Khetla e ka pele |
1. Theko e lekantsoeng ha ea nepahala
Alamo ea ho lemoha khase ka mor'a nako e sebelisoang ho lemoha likhahla e ka 'na ea hlaha ho kheloha, ho lekanya nako le nako.
2. Ho tsepamisa mohopolo ho feta boleng ba alamo e behiloeng;ha ho na alamo ea molumo, khanya kapa vibrate.
Sheba Khaolo ea 7 [Litaelo tse Khethehileng], litlhophiso -AL5 ka hare ho ON.
3. Betri e ka hare ho alamo ea ho lemoha khase e ka tjhaja?
Ha o khone ho tjhaja, fetola matla a betri a felile ka mor'a.
4. Alamo ea ho lemoha khase ha e khone ho qalisa
a) Alamo ea ho lemoha ha khase ea senyeha, bula ntlo ea mochine, tlosa betri, ebe u e kenya hape.
b) Betri ea fela, bula ntlo ea detector, tlosa betri, 'me u nkele mofuta o le mong, betri ea mofuta o tšoanang.
5. Litaba tsa khoutu ea phoso ke life?
Phoso ea password e fosahetseng
Err1 set value ha se ka har'a sebaka se lumelletsoeng ho hloleha ho lekanya Err2
Lihlahisoa tse amanang
-
Taelo ea Alamo ea Khase e Ntlheng e le 'Ngoe...
Tekheniki parameter ● Sensor: catalytic combustion ● Nako ea ho arabela: ≤40s (mofuta o tloaelehileng) ● Mokhoa oa ho sebetsa: ts'ebetso e tsoelang pele, ntlha e phahameng le e tlaase ea alamo (e ka behoa) ● Sehokelo sa Analog: 4-20mA pontšo ea tlhahiso [khetho] ● Sehokelo sa Digital: RS485-bus interface [khetho] ● Mokhoa oa ho bonts'a: Graphic LCD ● Boemo bo tšosang: Alamo e utloahalang -- ka holimo ho 90dB;Alamo e khanyang -- Li-strobes tse matla ● Taolo ea sephetho: re...
-
Buka ea Tataiso ea ho fetisa khase ea dijithale
Li-Parameters tsa Teknoloji 1. Molao-motheo oa ho lemoha: Mokhoa ona ka motlakase o tloaelehileng oa DC 24V, pontšo ea nako ea sebele le tlhahiso ea 4-20mA pontšo ea hona joale, tlhahlobo le ts'ebetso ho phethahatsa pontšo ea digital le ts'ebetso ea alamo.2. Lintho tse sebetsang: Tsamaiso ena e tšehetsa matšoao a tloaelehileng a ho kenya sensor.Lethathamo la 1 ke tafole ea rona ea maemo a khase (Bakeng sa litšupiso feela, basebelisi ba ka beha liparamente ...
-
Sesebelisoa sa Tšebetso sa Motsoako oa Portable Gas...
Tlhaloso ea sehlahisoa Sesebelisoa sa khase se nkehang se nkehang habobebe se nka 2.8-inch TFT skrineng sa mebala, se khonang ho bona mefuta e ka bang 4 ea likhase ka nako e le 'ngoe.E tšehetsa ho lemoha mocheso le mongobo.Sebopeho sa ts'ebetso se setle ebile se setle;e ts'ehetsa ponts'o ka Sechaena le Senyesemane.Ha mahloriso a feta moeli, sesebelisoa se tla romela molumo, khanya le vibrat ...
-
Mohloli o nkehang oa khase o tukang o dutlang Operatin...
Li-Parameters tsa Sehlahisoa ● Mofuta oa Sensor: Sensor ea Catalytic ● Fumana khase: CH4 / Khase ea Tlhaho / H2 / Ethyl joala ● Lebelo la tekanyo: 0-100%lel kapa 0-10000ppm ● Ntlha ea alamo: 25%lel kapa 2000ppm, e ka fetoloang ● Ho nepahala: ≤5: ≤5 %FS ● Alamo: Lentsoe + ho thothomela ● Puo: Tšehetsa Senyesemane & Sechaena sesebelisoa sa menu ● Pontšo: LCD digital display, Shell Material: ABS ● Voltage e sebetsang: 3.7V ● Bophahamo ba betri: 2500mAh Lithium battery ●...
-
Litaelo tsa ho tsamaisa libese
485 Overview 485 ke mofuta oa serial bese e sebelisoang haholo puisanong ea indasteri.Puisano ea 485 e hloka lithapo tse peli feela (mohala oa A, oa B), phetiso ea sebaka se selelele e khothaletsoa ho sebelisa para e sothehileng e sirelelitsoeng.Ka khopolo, sebaka se seholo sa phetisetso ea 485 ke maoto a 4000 'me tekanyo e phahameng ea phetisetso ke 10Mb / s.Bolelele ba para e leka-lekaneng e sothehileng bo lekana le t...
-
Pompo e nkehang ea khase ea sampole Litaelo tsa ts'ebetso
Lisebelisoa tsa Sehlahisoa ● Pontšo: Pontšo ea kristale ea letheba le leholo la skrine ● Qeto: 128 * 64 ● Puo: Senyesemane le Sechaena ● Lisebelisoa tsa Shell: ABS ● Molao-motheo oa ho sebetsa: Diaphragm self-priming ● Phallo: 500mL / min ● Khatello: -60kPa ● Lerata : (32dB ● matla a ho sebetsa: 3.7V ● Matla a betri: 2500mAh Li betri ● Nako ea ho ema: 30hours (boloka ho pompa ho bulehile) ● Ho tjhaja Voltage: DC5V ● Nako ea ho tjhaja: 3 ~ 5...
